Tardis "Kitty" Money Tin

[warmcanofcoke]

Delta and the Bannermen 1987 Season 24 Episode 150
DVD extra

[Davros Skaro]

Anyone wish to buy a tin? Hope you "Kitty" tin is full, you'll need it!
Check these out: https://www.ebay.com.au/sch/i.html?LH_PrefLoc=2&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xcerebos+salt+tin.TRS0&_nkw=cerebos+salt+tin&_sacat=0&_oac=1

They're not cheap!  

Chris.

[warmcanofcoke]

I suppose we could have a can printed up over at Etsy, If we had the graphic. Or If I start using photoshop. I will need to know the size of the can to properly layout the Graphic. We could have it printed up in 150dpi or better.

[Davros Skaro]

This one gives the measurements: http://www.ebay.com.au/itm/Antique-Vintage-CEREBOS-LITHO-TIN-Table-Salt-Tin-See-How-They-Run-/263072193544?hash=item3d40531c08:g:0AYAAOSwZ4dZMOJ5
Here is the description on the item;
VINTAGE CEREBOS LITHO TIN
TABLE SALT

3/4 OF THE ART WORK IS READABLE & THE REST IS MISSING
THE TIN HAS RUST (REFER TO THE PICS).

INTERIOR IS LINED WITH CARDBOARD.
I'M NOT SURE IF THESE CAME OUT THAT WAY?

H: 14 CM ~ D: 8 CM

REASONABLE CONDITION

Same with this one: http://www.ebay.com.au/itm/VINTAGE-CEREBOS-TABLE-SALT-ADV-LITHO-TIN-BOX-ENGLAND-/162407298826?hash=item25d03ab70a:g:tFkAAOSw4shX-6ln

Size : 14 X 8.25 Cm. (Approx.)
Weight :- 124 Grams

Hope this helps you Nate for the size.

Chris.

[warmcanofcoke]

Looking at the pictures we have, It looks like this is the closest design.


original-1920s-vintage-print-advertisement


Can lid insert image:

[lespaceplie]

Printing on a water decal sheet might produce something close to the desired result. It would be much thinner than a conventional sticker. You can find sheets at most hobby stores.

It look as though it's both transparent and opaque ink on the tin. That's tricky, but one way to do it would be to make a mask with an adhesive sheet trimmed on a Cricut or other die-cutting machine. You'd then spray the exposed areas with white paint and overlay with the translucent decal.