Apr 14, 2021, 04:17 am

News:

New, New TardisBuilders!


Re: My 1/6 scale Tardis, image heavy

Started by jiminydog, Apr 06, 2008, 10:15 pm

Previous topic - Next topic

jiminydog

Apr 06, 2008, 10:15 pm Last Edit: Feb 04, 2010, 04:30 pm by Scarfwearer
Hi guys, I hope this is the right place for this thread.  Once I decided to take on this project I found this site and I don't think I could have done it without all the information I found here, so thanks for that, and I wanted to share the final results!  

It's mostly balsa wood, not quite as sturdy as the "real" one!:)


dw1qi1.jpg

I added some "real" cables to give the backdrop a little more of a 3d feel...

dw2pw8.jpg

The windows are plexi, on their back side I attached a transparency printout of an actual screen grab of Tardis windows, (backed by opaque mylar), to give them some texture.


dw3ed9.jpg

The two doors and the phone door are hinged with a rod-and-socket thing I jimmied up out of bits and pieces.

dw4lc0.jpg

Phone is balsa with some little bits made out of Sculpey.  It's a little rough, but "it's not a real phone!"

dwphonewv8.jpg

The lantern glows white all the time (as it does when the Tardis is "parked") but I also cannibalized a toy I had and rigged up a switch so that you can trigger a glowing blue light accompanied by the Tardis materialization "roar".  If the peak on the roof seems just a tad too pronounced, it's because there's a lot of stuff crammed in under there.

dwlanterntc9.jpg

Backdrop is just a large printout of course, the trick there was to bend it around and trim it down so interior lighting could still shine out side windows.  



DoctorWho8

Apr 07, 2008, 12:17 am #1 Last Edit: Jan 14, 2010, 11:47 am by scarfwearer
That looks very nice.  Have you paired it up with the Flight Control TARDIS?
Bill "the Doctor" Rudloff

atomicgraph

Apr 07, 2008, 10:54 pm #2 Last Edit: Jan 14, 2010, 11:48 am by scarfwearer
nice job. and i love the phone

thefixer

Apr 08, 2008, 03:50 am #3 Last Edit: Jan 14, 2010, 11:48 am by scarfwearer
That's quite impressive especially the added detail of the hanging wires.