Doing some research on the metal clock, last seen with it's face melted off in Edge Of Destruction / Brink Of Dsaster...

It's a metal "skeleton" clock, manufactured by WF Evans, in the shape of Westminster Abbey.

I also found some photos of a similar clock, including a very nice closeup of the clock face fitted to this particular model (unmelted).

Absolutely beautiful! Thanks for that.

Wow! Been looking for decent pics of a clock like this for ages - thanks.

Look at The Chase ep.4 and you'll see the clock just plonked on the control room floor -no pedestal or anything!

One small difference is that 'our' one only has one bell, it hangs vertically from a bar rather than being horizontally mounted like these. Everything else is spot on though

Stunning pictures Cobalt - though at £15,000 for an original W F Evans clock, I doubt I shall be buying one. The catalogue indicates the originals were 24" high so, apart from the bell, as Marc says, this looks highly accurate.
I wonder if modern (cheaper) reproductions are available.
Tony

if we had a clear illustration of each layer of the clock we might be able to build one inexpensively. 

Quote from: warmcanofcoke on Feb 12, 2013, 03:40 pm
if we had a clear illustration of each layer of the clock we might be able to build one inexpensively.  

But we do
The templates are my work (and may require some tidying up) But a reasonable start, no?

Quote from: rassilonsrod on Feb 12, 2013, 04:14 pm

The templates are my work (and may require some tidying up) But a reasonable start, no?

Awesome work. Are you going to diagram the tower pieces too?

I wonder how expensive laser-cutting would be. Didn't someone on here have some bits for a console laser-cut?

Oh the last two... Yes I have a diagram for that, it apparently failed to upload.

As you can see, some of the curved bits are a bit rough. I would have liked to do it at a higher res too.

Hi Marc, are these plans to scale?
Tony

Overdrawn over the photos.

Cool - do you mind if I "borrow" them? 

Of course, and feel free to improve them if you have a mind to