Tardis Claw Machine

[bruce.cole2153]

Building the base cabinet.

Due to limitations such as the width of tge lift doors and my daughter's  apartment (flat) door opening, i had to limit the width to less than 850mm and the height to 1800mm

[bruce.cole2153]

As the build progressed- i had to work out how to attach the doors that would allow access to the internal part of the Tardis.
With the use of both normal  hinges and removal hinges, it was possible to allow the side panels to fold back on each other and the front doors fold back.

Some more pictures

[Volpone]

There's an extra step to uploading photos.  After you upload the photo, you've got to look for a green button next to the image file that says "ATTACH."  When you do that your photos won't appear "greyed out."  (Oh, and you can't do it in "Quick Edit," you've got to click "More" and do a full edit.)  If these directions aren't enough, I'll go in and write up step-by step ones.

[bruce.cole2153]

Thanks, will try again

[bruce.cole2153]

Thanks, will try uploading them again..

[Volpone]

You don't need to upload them again.  Open the post with the "More.." button (you can't do it with "Quick Edit").  Click the "Attachments and other options" underneath the text box.  You'll see a green box containing each image file.  At the bottom right corner are "DELETE" and "INSERT" buttons.  Click the "INSERT" button for each image.  I went ahead and did the first one.  Hope this helps. 

[bruce.cole2153]

Thanks for your help with getting the pictures posted.