Apr 16, 2021, 02:44 pm

News:

New, New TardisBuilders!


Orb Of FASA

Started by elkad, Feb 18, 2020, 08:10 pm

Previous topic - Next topic

elkad

Feb 18, 2020, 08:10 pm Last Edit: Feb 18, 2020, 08:12 pm by elkad
Reference: http://tardisbuilders.com/index.php?topic=10225.0

I started off with a 3" Christmas ornament, covered it in tape.
When measuring with the compass, start with 36.4mm to space the circle.  34.4mm to make the inner circle.
two measurements for the spacer triangle 39.2mm  41.5mm


Orb of FASA (1).jpg

elkad

Mar 08, 2020, 07:55 pm #1 Last Edit: Mar 08, 2020, 07:56 pm by elkad
I finish up marking my individual circle spaces.

Orb of FASA (2).jpgOrb of FASA (3).jpgOrb of FASA (4).jpgOrb of FASA (5).jpgOrb of FASA (6).jpgOrb of FASA (7).jpgOrb of FASA (8).jpg

elkad

Mar 11, 2020, 02:31 pm #2 Last Edit: Mar 11, 2020, 02:37 pm by elkad
I removed the tape to the sphere & put on a new layer. I had the tape sticky side up then another layer sticky side down. I realized if I started cutting into the tape the individual pieces would fall off. So I made another layer with the sticky side down.
I did remember to measure all the drawings I made on the last tape cover before I tore it off.
Also, I need to find my other dremel engraving bits before I continue. I can do the straight lines on the sphere with a cutting disk, but I'm not  able to make curve lines like the professionals,...Yet.
Anyway, hears what I've done so far.  ;D

Orb of FASA (9).jpg

Quick Thought?... You think I should leave the tape on, give it more depth? I could just color the tape instead of the plastic ball.  ???

elkad

Mar 14, 2020, 03:56 pm #3 Last Edit: Mar 14, 2020, 03:59 pm by elkad
It is not easy to cut very small circles with a drimal disc.

Orb of FASA (10).jpg

I decided to remove the tape & paint the individual sections. THOUGHT: Using tape is very sticky when cut, I should have used paper mache to get more of a line gap. That & I could have gotten a less of a messy line when cutting.

Orb of FASA (11).jpg

There are some holes in the sphere, but thy can be patched up with some clear glue.

Orb of FASA (12).jpg

It came out better then I thought. There are some lines I have to drimal again, otherwise, good. ;D

Orb of FASA (13).jpgOrb of FASA (14).jpg

Time to sand.

Orb of FASA (15).jpg

You think I should have started with a black paint? I'm not to clear on how too paint something so the light wont shine or bleed threw the paint.
I'm painting the orb & using a sharp file to scrape out the excess paint in the lines.

Orb of FASA (16).jpgOrb of FASA (17).jpg

elkad

Mar 15, 2020, 07:19 pm #4 Last Edit: Mar 15, 2020, 07:19 pm by elkad
It's not quite finished yet, needs more coloring & I like to make a LED light inside.

Orb of FASA (18).jpgOrb of FASA (19).jpg

davidnagel

That came out really well! Good job.
Kind Regards,

David

www.spiffinglyniceguy.co.uk

elkad

I forgot to load a late video on YouTube.


davidnagel

Nicely done!
Kind Regards,

David

www.spiffinglyniceguy.co.uk