11th/12th Doctor Tardis Console Parts identification

Started by timewomble, Jan 12, 2013, 12:06 am

Previous topic - Next topic

MacktheTardisGuy

So after reading through this, and seeing the toggle clamps, I went looking to find as close, or if not the exact part of the ones on the console, at first I searched for things like 'vintage vertical toggle clamp' and the like, but I saw something very similar to the one on the console, a 'weld on toggle clamp', and after searching that a lot of them look just like variations of the ones on the console, so I believe that the ones on the console are a form of weld on toggle clamps, I'll post some images I found of them here221005335494.jpg221005335472.jpg221005211622.jpg400_GN910-Heavy-duty-vertical-acting-toggle-clamps-with-horizontal-mounting-base-Longlife-E-Clamping-arm-with-bushing.jpg

MacktheTardisGuy

The first photo of the four is the closest I have found to the actual lever after five minutes of searching, so could be of use to somebody

ThisJustinOnline

The Green Lenses have been identified as Bulgin Indicator Lamps, DX0663.

Red.png


Green.jpg

ThisJustinOnline

Jan 07, 2024, 10:15 pm #123 Last Edit: Jan 07, 2024, 10:16 pm by Primrodo
Part identified for the fluted plates by Chris Godbert.

NOT Pastry cutters, but Jet Engine Fuel Spacers Part Number 317028B, 3 inches in diameter width.

image_2024-01-07_141104498.png
PXL_20240107_220430618.jpg
radio dial 2.jpg
PXL_20240107_213206514.jpg
radio dial.jpg
PXL_20240107_204123742.jpg
PXL_20240107_213222251.jpg

ThisJustinOnline

And another today courtesy of Chris Godbert.

MERCEDES-BENZ MB W123 W126 W201 R107 HEADLIGHT SWITCH 8432

image_2024-01-07_150411226.png
PXL_20240107_225931883.jpg
PXL_20240107_204225321.jpg